signature-specs3

Configuration	Three-way bass reflex enclosure using two 170mm hybrid Fibre glass/Nomex coned long throw Bass drivers (cast alloy frames), one 100mm cellulous fibre mid-range unit (cast alloy frame) and the same 35mm dual concentric tweeter that is used in the range topping Paragon.
Nominal Impedance	4 ohms
Power Handling	Transient peaks in excess of 300 watts. Average levels of 120 watts.
Sensitivity	Transient peaks in excess of 150 Watts. Average levels of 100 Watts.
Sensitivity	88dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response	38Hz to 40kHz ±3dB
Dimensions	1200H X 260W X 430D mm
Weight	45kg each
Finish	Bubinga real wood veneer or Graphite (Metallic duco)
Warranty	5 Years

Configuration	3-way floor standing speaker using a symmetrical speaker array. The bass section uses two 180mm Kevlar drivers in a rear ported enclosure. Two 100mm poly-glass drivers in a sealed enclosure cover the midrange frequencies. The tweeter uses a 35mm dual concentric diaphragm with a wave-guide centre plug. This tweeter uses an unusually large neodymium magnet structure.
Nominal Impedance	4 ohms
Amplifier Power Requirement	Approximately 40 - 200 Watts per channel
Power Handling	Transient peaks in excess of 250 Watts. Average levels of 100 Watts.
Sensitivity	91dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response	35Hz to 40kHz ±3dB
Crossover Module	Individually calibrated for each speaker in the pair for precise response match. Very high quality Cardas copper terminals. All internal cabling is Cardas high purity copper litz wire.
Dimensions	1420H x 285W x 380D mm. (Width including spikes is 400mmm)
Weight	75kg each.
Finish	Dark charcoal with Santos Palissander or Bubinga real wood veneer sides. Other finishes available to order.
Warranty	5 Years

Configuration	4-Way floor standing speaker using two 250mm sub-bass driver in Whise designed enclosure with its own in-built 350 watt amplifier. The bass section uses two 175mm sliced paper drivers in a sealed enclosure. Two 100mm poly-glass drivers in a sealed enclosure cover the midrange frequencies. The tweeter uses a 35mm dual concentric diaphragm with a wave-guide centre plug. This tweeter uses a unusually large neodymium magnet structure.
Nominal Impedance	4 ohms
Amplifier Power Requirement	Approximately 40 - 250 Watts
Power Handling	Transient peaks in excess of 250 Watts. Average levels of 100 Watts.
Sensitivity	90dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response	25Hz to 40kHz ±3dB
Dimensions	1570H x 520W x 720D mm. (Width including spikes is 630mm)
Weight	140kg each
Finish	Dark charcoal with Santos Palissander real wood veneer sides. Other finishes available to order.
Warranty	5 Years