Tornado2 Subwoofer
| Driver Configuration |
10” cellulose fibre cone; long throw; rubber surround with a 50mm voice coil |
| Enclosure |
Fully sealed with 25mm thick cabinet walls |
| Amplifier |
240 watts continuous power output, Class A/B. Line and speaker level inputs. Auto on/off switch. Continuously variable volume, phase and xover frequency |
| Bass Extension |
25Hz ± 3 dB, usable bass to below 20 Hz |
| Dimensions |
305w x 325h x 380d (mm) |
| Weight |
22kg each |
| Finish |
Black Oak |
|
Synergy3 Subwoofer
| Frequency Response |
22Hz – 80Hz +/- 3db |
| Amplifier Power |
200 watts |
| Driver |
250mm (10”) extreme throw, cellulous fibre |
| Enclosure Type |
Sealed |
| Cabinet Finish |
Full gloss: Ivory or Graphite |
| Dimensions |
330Wmm, X 370Dmm X 350H mm |
| Weight |
25kg |
|
Impulse2 Subwoofer
| Driver |
10” Cellulose fibre coned driver with extremely long linear excursion
(36mm) and a huge 3” voice coil. This driver is capable of higher output than most
12” drivers. |
| Enclosure |
25mm thick cabinet walls and extensively braced. |
| Amplifier |
200 watts continuous power output. Line and speaker level inputs. Auto on/off
switch. Continuously variable volume, phase and crossover frequency. |
| Bass Extension |
23Hz –3db, usable bass down to below 20 Hz. |
| Dimensions |
440H X 400W X 460D mm |
| Weight |
34 kg |
| Finish |
Bubinga (real wood veneer) or High Gloss Dark Graphite |
| Warranty |
5 years |
|